Fabric OS Reference Manual

Telnet Commands 173
portPerfShow
Display port throughput performance in bytes, kilobytes, or megabytes.
Synopsis
portPerfShow [interval]
Availability All users
Description Use this command to display throughput information for all ports on the
switch (8 or 16 columns depending on the switch model). One output line is
displayed per interval (or second if no interval is specified) until
return
,
control-C
, or
control-D
is entered.
Shown are the number of bytes received plus the number of
bytes transmitted per interval. Throughput numbers are shown as either
bytes, kilobytes (k), or megabytes (m).
Operands This command has the following operand:
interval
Specify the interval, in seconds, between each sample.
This operand is optional.
Example To display port throughput for an 8-port switch:
See Also
portStatsShow
switch:admin> portPerfShow
0 1 2 3 4 5 6 7
---------------------------------------
0 0 0 0 0 0 0 76m
96 0 96 0 0 96 0 76m
0 0 0 0 0 0 0 76m