Fabric OS Reference Manual

Telnet Commands 177
Operands This command has the following operand:
portnumber
Specify the port number to be displayed. Valid values
are 0-7 or 0-15 depending on the switch type. This
operand is required.
Multicast routing
table
Shows multicast frame routing to the destination
multicast group. Output format is
mcast_group_number
: (mcast_group_id)
ports_bitmap
where:
mcast_group_number
is the multicast group
number.
mcast_group_id
is the multicast frame destination
ID.
ports_bitmap
is a hex bitmap of all output port
numbers that can forward a multicast frame from the
portnumber
to
mcast_group_id.
Broadcast routing
table
A bitmap, containing all ports reachable by a received
broadcast frame. Bit 16 of the bitmap is always set to
allow the switch element to receive broadcast frames.