Fabric OS Reference Manual

Telnet Commands 179
portShow
Display port status.
Synopsis
portShow portnumber
Availability All users
Description Use this command to display status information for a port. Information
varies with the switch model and port type. The display shows the fields in
the following table.
Table 12. PortShow display fields
Field Description
portFlags Bit map of port status flags.
portType Port type and revision numbers.
portState Port SNMP state:
Online up and running
Offline not online,
portPhys
gives details
Testing running diagnostics
Faulty failed diagnostics
portPhys Port physical state:
No_Card no interface card present
No_Module no module (GBIC or other) present
No_Light module not receiving light
No_Sync receiving light but out of sync
In_Sync receiving light and in sync
Laser_Flt module is signaling a laser fault
Port_Flt port marked faulty
Diag_Flt port failed diagnostics
Lock_Ref locking to the reference signal