Fabric OS Reference Manual

Telnet Commands 19
agtcfgShow
Display the SNMP agent configuration.
Synopsis
agtcfgShow
Availability All users
Description Use this command to display the configuration of the SNMP agent in the
switch. The following information is displayed:
•
sysDescr
- Displays the switch description.
•
sysLocation
- Displays the location of the switch.
•
sysContact
- Displays the contact information for this switch.
•
swEventTrapLevel
- Displays the event trap level. There are six
possible values:
0 - none
1 - critical
2 - error
3 - warning
4 - informational
5 - debug
Note
See errShow for more information on the event trap level.
•
authTraps
- Displays whether authorization traps are passed to the
trap recipient. The default value is 0 (off), meaning no messages are
sent. A value of 1 (on) means that authorization trap messages are sent
to the community IP addresses configured (see page 20). For SNMPv1
and SNMPv2c, this indicates that a request containing a community
string is not known to the agent.