Fabric OS Reference Manual

Telnet Commands 193
Operands This command has the following operand:
mode
Specify whether to enable or disable SPLB mode.
Specify 1 to enable GBIC mode or 0 to disable SPLB
mode. The default value (if no operand specified) is
0
.
Example To enable or disable a 2-port loopback:
See Also
setGbicMode
spinSilk
switch:admin> setSplbMode 1
Committing configuration...done.
SPLB mode is now ON.
switch:admin> setSplbMode 0
Committing configuration...done.
SPLB mode is now OFF.