Fabric OS Reference Manual

20 Fabric OS Reference Manual
• There are six communities, each with a respective trap recipient,
supported by the agent. The first three communities are for read-write
access (rw) and the last three are for read-only access (ro).
For an SNMP Management Station to receive a trap generated by the
agent, the admin user must configure a trap recipient IP address of the
Management Station.
Community 1: Secret C0de - Displays the IP address for this trap
recipient.
Community 2: OrigEquipMfr - Displays the IP address for this trap
recipient.
Community 3: private - Displays the IP address for this trap recipient.
Community 4: public - Displays the IP address for this trap recipient.
Community 5: common - Displays the IP address for this trap recipient.
Community 6: FibreChannel - Displays the IP address for this trap
recipient.
Note
For more information about these SNMP configuration parameters,
see agtcfgset command.
Operands None.