Fabric OS Reference Manual

206 Fabric OS Reference Manual
snmpMibCapSet
View and modify options for configuring SNMP MIB/Trap Capability.
Synopsis
snmpMibCapSet
Availability admin
Description This command enables a user to turn on or off certain MIBS and TRAPS.
This command also enables a user to turn on or off group information and
SSN in SW trap messages. It first displays current settings and then
prompts the user to change the values for each parameter.
• FA-MIB – Specifying yes means the user can access FA MIB variables
with an SNMP manager. The default value is yes.
• SW-TRAP – Specifying yes means the SNMP management application
can receive SW traps from the switch. The default value is yes.
• FA-TRAP – Specifying yes means the SNMP management application
can receive FA traps from the switch. The default value is yes.
• SW-EXTTRAP – Specifying yes means the user can receive group
information such as Group Name, Group Type, and Member Position,
and SSN in the SW traps. The default value is no.
Operands none
Example To view or modify the options for configuring SNMP MIB traps:
See Also
agtcfgShow
agtcfgSet
agtcfgDefault
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP
FA-MIB (yes, y, no, n): [yes]
SW-TRAP (yes, y, no, n): [yes]
FA-TRAP (yes, y, no, n): [yes]
SW-EXTTRAP (yes, y, no, n): [no]
no change