Fabric OS Reference Manual

Telnet Commands 215
23.faultShow
24.traceShow
25.portLogDump
Operands This command has the following operands:
firstPort
Specify the first port, of a range of ports, to dump
information. The default (if no operand is specified) is
to print state of port 0. If only
firstPort
is specified,
only information for
firstPort
is printed.
lastPort
Specify the last port, of range of ports, to dump
information. If
firstPort
is specified but
lastPort
is not specified, only
firstPort
information is
printed for the port based commands (
portShow
,
portRegShow
, and
portRouteShow
). If no operand
is supplied,
firstPort
is set to 0 and
lastPort
is
set to maximum port of switch.
nLog
Specify the number of lines of
portLogDump
to print:
• 0 = dump all lines (default)
• N = dump the last N lines
• <0 = skip
portLogDump