Fabric OS Reference Manual

222 Fabric OS Reference Manual
The switch summary is followed by one line per port:
port numbe
r Port number. Valid values are 0-7 or 0-15 depending
on the switch type.
module type
Port module type (GBIC or other):
- no module present
sw
- shortwave laser
lw
- longwave laser
cu
- copper
id
- serial ID
port state
Port state:
No_Card
- no interface card present
No_Module
- no module (GBIC or other) present
No_Light
- module not receiving light
No_Sync
- module receiving light but out of sync
In_Sync
- module receiving light and in sync
Laser_Flt
- module signaling a laser fault
Port_Flt
- port marked faulty
Diag_Flt
- port failed diagnostics
Lock_Ref
- locking to the reference signal
Testing
- running diagnostics
Online
- port is up and running