Fabric OS Reference Manual

238 Fabric OS Reference Manual
Operands This command has the following operand:
Examples To display the unicast fabric topology:
See Also
portRouteShow
uRouteShow
In Ports:
Bit map of input ports to use the corresponding
Out Port to reach the destination domain. A bit
set to 1 indicates the port is being routed through
the corresponding Out Port. The least significant
bit represents port 0. This is the same information
provided in a different format by
portRouteShow
and
uRouteShow
.
Flags:
Always ‘D’, indicating a dynamic path. A
dynamic path is discovered automatically by the
FSPF path selection protocol.
Name:
Name of destination switch.
domainnumber
Specify the destination domain for which
topology information is to be displayed. This
operand is optional.
switch:admin> topologyShow
Local Domain ID: 1
Domain Metric Hops Out Port In Ports Flags Name
-------------------------------------------------------------
0 1000 1 2 0x00002000 D "sw25
1 6 0x00000000 D
1 7 0x00000000 D
3 1000 1 13 0x000000c4 D "sw4"
4 2000 2 2 0x00002000 D "sw10"
2 6 0x00000000 D
2 7 0x00000000 D
8 2000 0 2 0x00002000 D "sw16"
0 6 0x00000000 D
0 7 0x00000000 D
switch:admin> topologyShow 4
Local Domain ID: 1
Domain Metric Hops Out Port In Ports Flags Name
-------------------------------------------------------------
4 2000 2 2 0x00002000 D "sw10"
2 6 0x00000000 D
2 7 0x00000000 D