Fabric OS Reference Manual

Telnet Commands 239
trackChangesSet
Enables configuring of track-changes feature.
Synopsis
trackChangesSet [ mode ], [ snmptrapmode ]
Availability admin
Description This command enables or disables the track-changes feature. An
SNMP-TRAP mode can also be enabled. There are several trackable
changes:
• successful login
• unsuccessful login
• logout
• config file change from task
• track-changes on
• track-changes off
Operands This command has the following operands:
mode Specify 1 to enable the track-changes feature or specify
0 to disable the feature. The default (if no operand is
specified) is to disable the track-changes feature.
snmptrapmode Specify 1 to enable errors to be sent to the
SNMP-TRAP in addition to the errlog or specify 0 to
disable the SNMP-TRAP messages. The default (if no
operand is specified) is to disable SNMP-TRAP
messages.