Fabric OS Reference Manual

Error Messages 259
Diagnostic Error Messages
This section provides information on the probable cause of a diagnostic
error and what actions to take.
Table 18. Diagnostic Error Messages
Message Description Probable Cause Action
DIAG-BADINT
Err#1030, 2030
[centralMemoryTest,
cmiTest]
Port received an unexpected
interrupt
ASIC failure Replace
mainboard
assembly
DIAG-BUS_TIMEOUT
Err#0BoF, 4040F
[portRegTest,
sramRetentionTest]
ASIC register or ASIC SRAM
did not respond to an ASIC data
access
ASIC failure Replace
mainboard
assembly
DIAG-CAMINIT
Err#223B
[camTest]
Port failed to initialize due to one
of the following reasons:
• switch not disabled
• diagnostic queue absent
• malloc failed
• chip is not present
• port is not in loopback mode
• port is not active
Software
operational
setup error or
mainboard
failure
Retry, reboot, or
replace mainboard
assembly
DIAG-CAMSID
Err#223C
[camTest]
ASIC failed SID NO translation
test
ASIC failure Replace
mainboard
assembly