Fabric OS Reference Manual

260 Fabric OS Reference Manual
DIAG-CLEAR_ERR
Err#0001
Port diag error flag (OK or BAD)
is cleared
Informational
only
None required
DIAG-CMBISRF
Err#1021
[centralMemoryTest]
ASIC Central Memory SRAMs
did not complete the BISR within
the time-out period
ASIC failure Replace
mainboard
assembly
DIAG-CMBISRTO
Err#1020
[centralMemoryTest]
ASIC Central Memory SRAMs
did not complete the BISR within
the time-out period
ASIC failure Replace
mainboard
assembly
DIAG-CMERRPTN
Err#102B
[centralMemoryTest]
Error detected at the wrong port ASIC failure Replace
mainboard
assembly
DIAG-CMERRTYPE
Err#102A
[centralMemoryTest]
Port got the wrong CMEM error
type
ASIC failure Replace
mainboard
assembly
DIAG-CMICKSUM
Err#2036
[cmiTest]
CMI message received failed bad
checksum test
ASIC or
mainboard
failure
Replace
mainboard
assembly
DIAG-CMIDATA
Err#2035
[cmiTest]
CMI data received did not match
data transmitted
ASIC or
mainboard
failure
Replace
mainboard
assembly
Table 18. Diagnostic Error Messages (continued)
Message Description Probable Cause Action