Fabric OS Reference Manual

Error Messages 265
DIAG-PORTSTOPPED
Err#3874
[spinSilk]
Port is no longer transmitting, as
indicated by the Number Of
Frames Transmitted counter
being stuck at N frames
ASIC, GBIC
module, or fibre
cable failure
Replace
mainboard
assembly, GBIC
module, or fibre
cable
DIAG-PORTWRONG
Err#3078
[crossPortTest]
Frame erroneously received by
port M instead of the intended
port N
ASIC failure Replace
mainboard
assembly
DIAG-POST_SKIPPED
Err# 0004
[switch initialization]
POST is skipped Informational
only
None required
DIAG-REGERR
Err#0B15, 0415
[portRegTest,
sramRetentionTest]
Data read from ASIC register or
ASIC SRAM did not match data
previously written into same
location
ASIC failure Replace
mainboard
assembly
DIAG-REGERR_UNRST
Err#0B16, 0416
[portRegTest,
sramRetentionTest]
Port failed to unreset ASIC failure Replace
mainboard
assembly
Table 18. Diagnostic Error Messages (continued)
Message Description Probable Cause Action