Fabric OS Reference Manual

Feature Telnet Commands 277
QuickLoop Commands
For detailed information about these commands, see the QuickLoop User’s
Guide.
Zone Configuration and Management
cfgAdd Adds a zone to a zone
configuration.
cfgClear Clears all zone configurations.
cfgCreate Creates a zone configuration.
cfgDelete Deletes a zone configuration.
cfgDisable Disables a zone configuration.
cfgEnable Enables a zone configuration.
cfgRemove Removes a zone from a zone
configuration.
cfgSave Saves zone configurations in
flash memory.
cfgShow Shows zone configuration
definition.
cfgTransAbort Aborts the current zoning
transaction.
Table 20. Zoning Commands (continued)
Command Description
Table 21. QuickLoop Commands
Command Description
qlDisable Disables QuickLoop mode on the switch.
qlEnable Enables QuickLoop mode on the switch.
qlPartner Specifies a partner for a QuickLoop or displays
information about the existing partner.
qlPortDisable Disables a port from QuickLoop mode.