Fabric OS Reference Manual

Telnet Commands 31

4. Check that all ASICs (other than Y) do not have:

– The capture flag set.

– The CMI error bit set.

– The CMI error interrupt status bit set.

Operands This command has the following operand:

passCount

Specify the number of times to execute this test. The

default value is 1. This operand is optional.

Example To run the ASIC to ASIC connection test of the CMI bus:

Errors There are seven possible error messages if failures are detected:

DIAG-CMISA1

DIAG-CMINOCAP

DIAG-CMICKSUM

DIAG-CMIINVCAP

DIAG-CMIDATA

DIAG-INTNIL

DIAG-BADINT