Fabric OS Reference Manual

32 Fabric OS Reference Manual
configDefault
Restore system configuration to default settings.
Synopsis
configDefault
Availability admin
Description Use this command to reset system configuration to default values.
All configuration parameters, with the following exceptions, are reset to
default values:
• Ethernet MAC address, IP address, and subnetmask
• IP gateway address
• license keys
• OEM customization
• SNMP configuration
• system name
• worldwide name
• Zoning configuration
Note
See the Configure command for more information on default values
for configuration parameters.
Note
Do not run this command on an operational switch. First disable the
switch using the switchDisable command.
Some configuration parameters are cached by the system. To avoid
unexpected switch behavior, reboot the system after executing this
command.
Operands None.