Fabric OS Reference Manual

Telnet Commands 33
Example To restore the system configuration to default values:
See Also
agtcfgDefault
configure
switchDisable
switchEnable
configDownload
Download the switch configuration from a host file.
Synopsis
configDownload ["host","user","file"[,"passwd"]]
Availability admin
Description Use this command to download the switch configuration file from a host
system. The configuration file is ASCII text and may have been generated
using
configUpload
, or it may have been created by a user to download
specific configuration changes.
The download process uses either FTP or the RSHD protocol (TCP
service 514).
On Windows NT, the FTP server may have to be installed from the
distribution media and enabled, or on Windows NT or Windows 9x, there
are several good freeware and shareware FTP servers available. To use
RSHD on Windows NT or 9x, two utilities are supplied, RSHD.EXE and
CAT.EXE, together with instructions on how to install and run them. The
FTP server or RSHD must be running before a download can be initiated.
The command may be invoked without any operands, in which case the
user is prompted for input, including choice of FTP or RSHD. If invoked
with three operands, RSHD is used; otherwise, presence of the password
operand selects FTP.
switch:admin> configDefault
Committing configuration...done.