Fabric OS Reference Manual

Telnet Commands 41
The tables in the next section define those settings that may be changed.
Arbitrated Loop Settings
This section provides information on arbitrated loop settings.
End-of-file (control-D) When entered at a prompt with no preceding
input, terminates the command and saves
changes made.This keystroke is common on
many computers, but can be different on your
system.
Field Type Default Range
Send FAN frames? Boolean 1 0 or 1
Always send RSCN? Boolean 0 0 or 1
Send FAN frames? Specifies that fabric address notification (FAN)
frames be sent to public loop devices to notify
them of their node ID and address. When set to 1,
frames are sent; when set to 0, frames are not
sent.
Always send RSCN? Following the completion of loop initialization, a
remote state change notification (RSCN) is issued
when
FL_Ports
detects the presence of new
devices or the absence of preexisting devices.
When set, an RSCN is issued upon completion of
loop initialization, regardless of the presence or
absence of new or preexisting devices.