Fabric OS Reference Manual

Telnet Commands 45
System Services Settings
There are two fields that are used to specify the system service settings.
This section provides a description of the system service setting fields:
rstatd Dynamically enables or disables a server that returns
information about system operation information
through remote procedure calls (RPC). The protocol
provides for a wide-range of system statistics; however,
only Ethernet interface statistics (see
ifShow
) and
system up time (see
uptime
) are supported.
The retrieval of this information is supported by a
number of operating systems that support RPC. On
most UNIX-based systems (HP-UX, Irix, Linux, etc.),
the commands to retrieve the information are
rup
and
rsysinfo
. See your local system documentation for
the appropriate usage of these or equivalent commands.
rusersd Dynamically enables or disables a server that returns
information about the user logged into the system
through remote procedure calls (RPC). The information
returned includes user login name, the system name,
login protocol or type, login time, idle time, and remote
login location (if applicable).
The retrieval of this information is supported by a
number of operating systems support RPC. On most
UNIX-based systems (HP-UX, Irix, Linux, etc.), the
command to retrieve the information is
rusers
. See
your local system documentation for the appropriate
usage of this or an equivalent command.
Table 1. System Service Settings
Field Type Default Range
rstatd
Boolean Off On/Off
rusersd
Boolean Off On/Off