Fabric OS Reference Manual

Telnet Commands 57

diagClearError

Clear the

diag

software flag to allow for retest.

Synopsis

diagClearError [port]

Availability admin

Description Use this command to clear the

diag

software flag that indicates whether a

port is BAD or OK. The current flag settings are displayed by using the

diagShow

command. This command resets the flag to allow the bad port to

be retested; otherwise the test skips the port.

This command does not clear the error log entry. Instead, it generates the

DIAG-CLEAR_ERR

message for each port software flag cleared. For

example:

0x10f9d560 (tShell): Apr 9 08:35:50

Error DIAG-CLEAR_ERR, 3,

Pt13 (Lm3) Diagnostics Error Cleared

Err# 0001

Operands This command has the following operand:

port

Specify the port where you want to reset the

diag

software flag. The default (if no operand is specified) is

to clear all bad port flags. This operand is optional.

Example To clear the diag software flag: