Fabric OS Reference Manual

Telnet Commands 61
See Also
camTest
centralMemoryTest
cmiTest
diagDisablePost
portLoopbackTest
portRegTest
ramTest
diagHelp
Display available diagnostic help commands.
Synopsis
diagHelp
Availability All users
Description Use this command to display a list of the diagnostic help commands for
troubleshooting switch problems.
Operands None.
Example To display diagnostic help commands:
switch:admin> diaghelp
ramTest System DRAM diagnostic
portRegTest Port register diagnostic
centralMemoryTest Central memory diagnostic
cmiTest CMI bus connection diagnostic
camTest Quickloop CAM diagnostic
portLoopbackTest Port internal loopback diagnostic
sramRetentionTest SRAM Data Retention diagnostic
cmemRetentionTest Central Mem Data Retention diagnostic
crossPortTest Cross-connected port diagnostic
spinSilk Cross-connected line-speed exerciser
diagClearError Clear diag error on specified port
diagDisablePost Disable Power-On-Self-Test
diagEnablePost Enable Power-On-Self-Test
setGbicMode Enable tests only on ports with GBICs
setSplbMode Enable 0=Dual, 1=Single port LB mode
supportShow Print version, error, portLog, etc.
diagShow Print diagnostic status information
parityCheck Dram Parity 0=Disabled, 1=Enabl
switch:admin>