Fabric OS Reference Manual

Telnet Commands 63
It can also be looped by specifying the
nseconds
operand. This operand
enables you to specify a repeat interval for this command. If a repeat
interval is specified, the command continues to execute until interrupted.
For example,
diagShow 4
executes
diagShow
every 4 seconds unless
stopped by a keyboard interrupt.
Also use this command to isolate a bad GBIC. A changing “
LLI_errs
”
value prefixed by “**” indicates a port is continuing to detect errors.
Operands This command has the following operand:
nSeconds
Specify the repeat interval (in seconds) between
executions of
diagShow
. If a repeat interval is
specified, the command continues to execute until
interrupted. If this operand is not used, the default is to
print the information once. Valid values are from 1 to
2**32. This operand is optional.