Fabric OS Reference Manual

92 Fabric OS Reference Manual
Example To force the link for the “
fei0
” Ethernet interface from auto-negotiate
operation to 10 Mbps / Half duplex operation:
See Also
ifModeShow
ifShow
ifModeShow
Display the link operating mode for a network interface.
Synopsis
ifModeShow ["interface"]
Availability All users
Description Use this command to display the link operating mode for a network
interface.
Operands This command has the following operand:
interface
Specify the name of the interface in quotation marks.
For example, “
fei0
”, where
fei
is the network
interface and 0 is the physical unit.
Example To display the link operating mode for the “
fei0
” Ethernet interface:
See Also
ifModeSet
ifShow
switch:admin> ifModeSet "fei0"
Auto-negotiate (yes, y, no, n): [no]
100 Mbps / Full Duplex (yes, y, no, n): [no]
100 Mbps / Half Duplex (yes, y, no, n): [no]
10 Mbps / Full Duplex (yes, y, no, n): [no]
10 Mbps / Half Duplex (yes, y, no, n): [no] yes
Committing configuration...done.
switch:admin> ifModeShow "fei0"
fei (unit number 0):
Link mode: Auto-negotiate