HP Surestore FC Swtich 6164 Quick Start Guide

Quick Start Guide

Note

A package containing two mounting rails may be included with the

switch. These rails are not used and can be discarded.

D Rail Tray kit (Rail tray, 2 brackets, 2 M5 Tinnerman nuts, 4 M5 torx

screws) (HP P/N A6534-60016)

E Shim plates (2 ea. HP P/N A7326-87904)

F Rack-Mount Bracket set (2 Rack-Mount brackets)

(HP P/N A7326-87901)

G Switch door (part of Accessory kit [HP P/N A7326-70001], which

also includes: software CD, documentation CD, and serial cable)

H Miscellaneous hardware: (not shown) (HP P/N A7326-87905)

Note: The hardware in the standard hardware package (unmarked plastic bag)

is required to install the switch in an HP rack. Some of the hardware in the

standard hardware package and the hardware in the Compaq/Rittal hardware

package is required to install the switch in a Compaq/Rittal rack.

Standard hardware package

8 #8-32 x .375-inch (.3125) flat-head screws w/patchlock

8 M5 torx screws with lock washers

6 M5 Tinnerman nuts

4 1/4-20 x 1/2-inch Phillips pan-head screws with lock washers

Compaq/Rittal hardware package

6 #10-32 Tinnerman nuts

6 #10-32 x 5/8-inch Phillips pan-head screws with captive lock washers

6 spacers

4 1/4-inch flat washers

4 M5 flat washers

Table 1. Contents of the Shipping Carton(s) (continued)