HP Surestore FC Swtich 6164 Quick Start Guide

18 Quick Start Guide
Note
When installing the rail tray in a Compaq/Rittal rack, ignore the
mounting instructions on the label attached to the rail tray (some rail
trays do not have this label).
c. Install Tinnerman nuts for the top holes of RU-1 in both of the rack’s
front uprights (see Figure 5).
Note
The Tinnerman nuts used for the two types of racks (HP and
Compaq/Rittal) are of different styles and different sizes. Refer to
Figure 3 and Figure 5 to identify the correct Tinnerman nut to use with
the rack you are installing the switch in.
Figure 5. Installing Tinnerman Nuts and Spacers on the Front Uprights
Inner surface of
Compaq/Rittal
rack
Spacer
Tinnerman
nut
Outer surface of
HP rack