HP Surestore FC Swtich 6164 Quick Start Guide

Installing the Switch 21
5. Insert Tinnerman nuts onto the center holes of RU-5 and the top holes of
RU-12 in both of the rack’s rear uprights (see Figure 8).
6. Install the rack-mount brackets on the switch:
a. The rack-mount brackets consist of a stationary plate and an adjustable
plate that are attached to each other with two screws. Remove the
screws that attach the adjustable plates to the stationary plates. Set the
screws and the adjustable plates aside for later use (see Figure 9).
Figure 8. Installing Tinnerman Nuts in RU-5 and RU-12
Figure 9. Separating the Rack-Mount Bracket Plates
1
5
12
11
4
Rack uprights
1
5
12
11
4
#10-32Tinnerman nuts
HP Rack Rittal Rack
M5 Tinnerman nuts