HP Surestore FC Swtich 6164 Quick Start Guide

Quick Start Guide

9. Remove the two screws that attach the latch plate to the right side of the

switch at the front, and remove the latch plate (see Figure 12). Set the

latch plate and the screws aside for later use.

Note

The latch plate fits through a cutout in the rack-mounting flange on

the right side of the switch.

10.Remove the eight #10-32 Phillips screws that attach each of the

rack-mounting flanges to the sides of the switch at the front, and remove

the rack-mounting flanges (see Figure 12). Set the rack-mounting flanges

and the screws aside for later use.

Figure 12. Removing the Latch Plate and the Mounting Flanges

Rack-mounting

flange

Latch plate