HP Surestore FC Swtich 6164 Quick Start Guide

32 Quick Start Guide
19.Install the switch door:
a. Rotate the knobs on the switch door so that they are in the down
position and the springs are compressed.
b. Position the door so that the hinge pins are between the loops on the
hinge plates mounted on the switch (see Figure 13 and Figure 19).
Note
When you rotate the door to the closed position, the
spring-loaded hinge pins will snap into the loops on the hinge plates.
Note
To ensure that the switch does not emit RFI, the switch door must
be installed, and it must be kept closed during normal operation.
Figure 19. Installing the Switch Door