Service and User Manual (Short- and Long-Wave)

24 Procedure 2: Unpack the Hub
Procedure 2: Unpack the Hub
1. Unpack and inspect the hub for damage that may have occurred during shipment.
2. Save the boxes and packing materials in case there is damage or anything needs to be
reshipped at a future date.
3. Verify that all items shown in Figure7 are present. Contact an HP sales representative
if items are missing.
4. If the hub is to be used as a standalone unit, attach the four rubber feet to the bottom
corners of the hub. Optionally, remove the hub’s preinstalled mounting ear brackets and
nylon retainers. The brackets and retainers are used to mount the hub in a rack.
Figure 7 Standalone Product Contents
Models S10 and L10
Service and User Manual
power cord
loopback
cable
rubber feet
mounting
nylon retainer
installed FC
port covers
ear bracket
NOTE: The long-wave hub
includes an additional loopback
cable for the long-wave port.
HP SureStore E Hub
hub