Service and User Manual (Short- and Long-Wave)

44 Overview
2. Set Networking parameters
Use this option to view or change the hub network configuration, including the IP
address. For cascaded hubs, use this option to define parent/child relationships.
3. Management options
This option displays a menu for changing SNMP values.
4. Hub information
Use this option to view the media access control (MAC) address and serial number.
Tips for Using the RS-232 Interface
• To enter a command, type the number that corresponds to the desired option, then press
<ENTER>. An appropriate submenu appears.
• To enter a value, type the value and then press <ENTER>. To enter multiple values, enter
each one separately.
• Enter 1 to return to the previous menu or option.
• From the Main menu, enter 1 to reset the hub. New self-test values are displayed after
the hub has been reset.
• When you have finished making changes, you can close the terminal connection and
disconnect the serial cable.