Hardware Operator's Guide

2-1
2
Controls, Indicators, and Configuration
This chapter shows the locations and describes the functions of the library
storage module (LSM) operator panel and the power switch. It also shows how
to set the Small Computer Systems Interface (SCSI) address and the maximum
usage count of the cleaning cartridges. Refer to the drive publications for
information about operating the drives.
■ LSM Operator Panel
The LSM operator panel is on the right front door of the LSM. The panel
contains softkeys and indicators, plus a two-line display. The LSM operator
panel shows LSM status, configuration, test sequences, and error information.
Figure 2-1 shows the panel and describes each item.
You use this panel to:
• Resolve machine problems.
If an error occurs, the display shows a fault symptom code (FSC) that you
can give to the customer engineer to help resolve problems. Write down the
FSC as soon as it is displayed.
• Receive instructions to close the door or cartridge access port (CAP).
• Set the SCSI robotic address.
• Set the maximum usage count of the cleaning cartridge.