Hardware Operator's Guide

Operating in Manual Mode
3-12
Locating a Cartridge in the Storage Cells
Figure 3-6 and Figure 3-7 show the locations of the panels, rows, and columns
of the cartridge storage cells when the expansion door and 10 drives are
installed. The decal at the top of each column also provides location
information.
Figure 3-8 shows the locations of reserved storage cells. These cells are used to
store diagnostic and cleaning cartridges, and to provide an empty/dropoff cell
where the robot inserts a cartridge when the LSM loses power while a cartridge
is in the hand.
CAUTION:
Do not insert data cartridges into reserved cells or the LSM will not be
able to complete its initialization routines. If it does not initialize, it
cannot be placed online.
Figure 3-6. Locating Cartridges—Top View
PANEL 3
PANEL 0
PANEL 1
PANEL 2
H_C60035
COLUMN 0
COLUMN 0
COLUMN 0
COLUMN 0
LSM WITH EXPANSION DOOR