HP DLT Tape Library 15-Slot - (English) User's Guide

2-3
Library Installation
Step 1: Choose a Location
Library Installation
Step 1: Choose a Location
Choose a location that meets the following criteria. Take the library there
before unpacking it.
Table 2-1 Location Criteria
Room
temperature
50-104° F (10-40° C)
Power source AC power voltage: 100-127 V or 200-240 V
Air quality Minimal sources of particulate contamination. Avoid
areas near frequently-used doors and walkways,
stacks of supplies that collect dust, and smoke-filled
rooms.
CAUTION: Excessive dust and debris can damage
tapes and tape drives.
Adequate
clearance
Standalone configuration — free standing or against a
wall/desk:
Back 56 cm (22 in.) for cooling and service.
Front 86 cm (34 in.) for operator access.
Sides56 cm (22 in.) for removal of the external cover.
Rack mount configuration:
Back Allow adequate room to open the rear
door of the rack for service access,
usually 46-61 cm (18-24 in.), depending
on the rack.
Front 86 cm (34 in.) for operator access.
Height For ease of use, the bottom of the library
should be 60-120 cm (24-48 in.) above the
floor.