HP DLT Tape Library 15-Slot - (English) User's Guide

2-4

Library Installation

Step 2: Prepare Components

Make sure all required components are available.

Table 2-2 Components Required for Installation and Use

If any components are missing, contact a sales representative.

Component Installation Notes

Library Do not unpack the library until it is in the

proper location.

SCSI card(s) Required number of cards installed in host depends on

library configuration. Connect drives and robotics

controller to differential fast/wide SCSI cards.

SCSI cables Required number of cables (68-pin) is one per drive and

one for the robotics controller. Maximum cable length

(total) is 25 meters.

Power cord Power cord is included with library.

Rack mount kit Rack mount kit is included with rack mount libraries.

Data cartridge One HP DLTtape IV data cartridge is included with

library.

Cleaning

cartridge

Cleaning cartridge is included with library.