HP DLT Tape Library 15-Slot - (English) User's Guide

2-13
Library Installation
Step 7: Connect Power
Library Installation
Step 7: Connect Power
1. Plug the power cord into a proper outlet.
2. Turn on the power switch.
SELF TEST and NOT READY, and then NOT READY and INVENTORY
CHECK display alternately. After the power-on test completes (in about 3
minutes), the drive status information displays. (See “Understanding the
Display Window” on page 4-4.)
NOTE If the drive status information does not display, the power-on test was not
successful and DEVICE FAILED displays. See “resolving Other Problems”
on page 4-43.
3. Turn on the host system.