HP DLT Tape Library 15-Slot - (English) User's Guide

4-9
Library Operation
Specifying SCSI Addresses
Library Operation
Specifying SCSI Addresses
1 2 ➞ ADMIN* ➞ PSWD 00 000 000 ➞ SCSI IDs
NOTE The tape library has a Fast/Wide SCSI interface. SCSI addresses can be set
from:
• 0 to 7 on a DLT4000-based library
• 0 to 15 on a DLT7000-based library
If connecting to a narrow host, use only addresses 0 to 7.
Table 4-1 SCSI ID Options
Table 4-2 Default SCSI Address Settings
Option Purpose Explained in
SET IDs* Assigns individual SCSI IDs to each
drive and the robotics controller.
“Setting SCSI Addresses” on
page 4-10
VIEW IDs* Displays the current drive and robotics
controller settings.
Viewing Current SCSI Addresses”
on page 4-10
DEVICE SCSI ID BUS #
LIB 6 Bus 1
DRV 1 5 Bus 1
DRV 2 (two-drive models only) 4 Bus 2