HP DLT Tape Library 15-Slot - (English) User's Guide

4-24
Library Operation
Setting Configuration Options
Setting Configuration Options
1 2 ➞ ADMIN* ➞ PSWD 000 000 000 ➞ CONFIG*
Set certain options, called configurations, to customize the way the library
operates.
To change a configuration:
1. Verify that the drive status displays (if not, press
CANCEL
until it does).
2. Press
NEXT
until ADMIN* displays, then press
ENTER
.
3. Enter the three-part numerical password (see “Entering the
Administration Menu Password” on page 4-7).
4. INFO* displays. Press
NEXT
until CONFIG* displays, then press
ENTER
.
5. Press
NEXT
or
PREV
until the name of the configuration to set displays,
then press
ENTER
. If the configuration has multiple settings, the current
setting flashes. Otherwise, the configuration option is set and a
confirmation message displays. (Configuration options are described on
the following pages.)
If the current configuration setting is flashing, press
NEXT
or
PREV
until
the desired setting displays, then press
ENTER
. OPTION SAVED displays.
6. Press
CANCEL
to return to the drive status (“ready” state).