HP DLT Tape Library 15-Slot - (English) User's Guide
4-36
Library Operation
Using Online Repair
6. Press
NEXT
until DRV # OFF FAILED displays then press
ENTER
.
7. CHANGE CONFIRMED displays briefly, then ONLINE REPAIR*
displays. Press
ENTER
.
8. DRIVE POWER* displays.
9. Press
NEXT
or
PREV
until DRIVE STATUS displays, then press
ENTER
.
10. Press
NEXT
or
PREV
until DRV # OFF FAILED displays (where “#” is the
number of the drive that was just taken offline) then press
ENTER
.
11. DRV # OFF FAILED displays, where “#” is the drive number and “OFF
FAILED” is flashing.
12. Press
NEXT
until DRV # ON GOOD displays, then press
ENTER
.
13. SETTING UP DRIVE displays briefly while the drive communication
tests run, then CHANGE CONFIRMED displays briefly, then ONLINE
REPAIR* displays.
14. Press
CANCEL
twice to return to the drive numbers and status indicators
(“ready” state).
15. Try reading the damaged tape again.
• If the tape can be read, back up data from the damaged cartridge to
another tape cartridge and discard the damaged one.
• If the tape cannot be read, call a service representative.