HP DLT Tape Library 15-Slot - (English) User's Guide

4-37
Library Operation
Clearing a Drive Cleaning Error
Library Operation
Clearing a Drive Cleaning Error
1 2 ➞ ADMIN* ➞ PSWD 000 000 000 ➞ ONLINE REPAIR
CAUTION Using this option causes the library drive mechanism(s) to become inactive.
To use this option to clear a drive cleaning error:
1. With CLEAN DRV # displayed, press
CANCEL
until the drive status
displays. (# is the drive number containing the damaged tape.)
2. Press
NEXT
until ADMIN* displays, then press
ENTER
.
3. Enter the three-part numerical password (see “Entering the
Administration Menu Password” on page 4-7).
4. INFO* displays. Press
NEXT
or
PREV
until ONLINE REPAIR* displays,
then press
ENTER
. DRIVE POWER* displays.
5. Press
NEXT
or
PREV
until DRIVE STATUS displays, then press
ENTER
. DRV
1 ON GOOD displays.
• If the damaged tape is in drive 1, press
ENTER
.
• If the damaged tape is in drive 2, press
NEXT
until DRV 2 ON GOOD
displays, then press
ENTER
.
DRV # ON GOOD displays, where “#” is the drive number and ON GOOD
is flashing.
6. Press
NEXT
until DRV # OFF FAILED displays then press
ENTER
.
7. CHANGE CONFIRMED displays briefly, then ONLINE REPAIR*
displays. Press
ENTER
.
8. DRIVE POWER* displays.
9. Press
NEXT
or
PREV
until DRIVE STATUS displays, then press
ENTER
.
10. Press
NEXT
or
PREV
until DRV # OFF FAILED displays (where “#” is the
number of the drive that was just taken offline) then press
ENTER
.
11. DRV # OFF FAILED displays, where “#” is the drive number and “OFF
FAILED” is flashing.
12. Press
NEXT
until DRV # ON GOOD displays, then press
ENTER
.