HP DLT Tape Library 15-Slot - (English) User's Guide

4-42
Library Operation
Troubleshooting
Robotics Controller Expert Tools
The following table lists expert tool categories, and the specific commands
available within each for the robotics controller.
Table 4-10 Robotics Controller Expert Tool Commands
Category Command Effect
File EXIT Exits the Support Tools Manager.
Logs VIEW LOGS Displays the Error, Recovery, Drive, Odometer, and Runtime
Logs.
Info DESCRIBE Displays the vendor ID, product ID, product revision level, and
peripheral device type.
READ ELEMENT
STATUS
Displays the status of the Storage, Medium Transport, Data
Transfer, or Import/Export Element.
MODE SENSE Displays the Device Capabilities or Element Address mode
page.
Tests TEST UNIT READY Sends a Test Unit Ready command.
SELFTEST Runs the power up selftest, which calibrates the picker and
inventories the library.
WELLNESS Runs the power up selftest, then performs the “Exercise
Mechanism” test (see below).
EXERCISE
MECHANISM
Tests the picker’s ability to interact with a drive and storage slot
(each randomly selected), and the mail slot. At least one drive
and the mailslot must be empty at the outset for this test to
execute properly.
EMPTY DRIVES Moves cartridges out of the drive mechanism(s) and returns
them to their storage slots.
FILL PICKER Loads the picker with a cartridge from the first slot containing a
cartridge.