DLT Tape Drive Installation Instructions

62114 3
■ Tape Library Attachment
Perform these procedures to install a DLT8000 drive in an 20/700 library:
Tools Required
• Phillips screwdriver
• 3/16-inch nut driver
❑ Remove shipping restraint
❑ Install drive(s) in library
❑ Attach Y-cable between the drive and library bulkhead
❑ Attach interface cable to drive
❑ Power-on drive
❑ Configure DLT drive
❑ Attach SCSI Terminator
❑ Attach interface cable to host