Hardware Operator's Guide

Manual Operations
Hardware Operator’s Guide
3–6
DLT Library
Removing/Replacing a Cartridge in the Storage Cells
Figure 3–5 shows the storage cell locations in the library, arranged in columns.
When you locate the cartridge tape you need, pull it straight out of the cell.
Figure 3–5. Storage Cell Locations
In this figure, the number in parentheses equals the total cartridge count. The other
number is the storage cell number in one of the three columns. The storage cell
layout as a whole is called the “array.” The “array targets” are used for robotic
calibration during initialization.