HP StorageWorks 200 Storage Virtualization System owner's guide (AE071-96004, October 2006)

Laser safety
When equip ped with native Fibre Channel a d apters, this product contains a laser
internal to th
e O ptical Link Mod ule (OLM) contained on the 8-port Fibre Channel
Adapter board and 8-port FICON board, and on the 16-port Fibre Channel Adapter
board and 16-port FICON board for connection to a fibre communications network.
In the USA, th
eOLMiscertified as a Class 1 laser product conforming to the PRT
requirement
s contained in the Department of Health and H uman Services (DHHS)
regulation 21 CFR, Subchapter J. The certification is indicated by a label on the plastic
OLMhousing. OutsidetheUSA,theOLMiscertified as a Class 1 laser product
conforming to the requirem ents contained in IEC 825 -1:1993 and EN 60825-1:1994,
including Amendment 11:1996.
The following figure shows the Class 1 information label that appears on the plastic
housing of the OLM.
CLASS 1 L A
SER PRODUCT
Complies with
21 CFR 1040.10 and 1040.11
Each comm
unications port consists of a transmitter and receiver optical subassembly.
The transmitter subassembly contains an internal semiconductor laser diode in the
wavelength range of 770 to 850 nanometers. In the event of a break anywhere in the
fibre path, the OLM control system prevents laser emissions from exceeding Class 1
levels
. Class 1 laser products are not considered hazardous.
WARNING!
Therearenousermaintenanceoperations,serviceoperations,oradjustmentstobe
performed on the Optical Link Module.
56
Regulatory statements