HP StorageWorks 200 Storage Virtualization System site preparation guide (AE071-96003, October 2006)

Basic configuration
The basic system consists of one 19-inch rack containing:
• One controller with control panel and SVP blade PC
• Mix board with host ports
• Power s upplies, power d istribution units (PDUs), backup batteries, and power cords
Expansion
You can expand the rack as follows:
• Add a second factory-installed controller above the first controller
• Add other equipment above the controller
Dimensions
Use the packaged and unpackaged values below when determining delivery and transport space
requirements. For shipments to the USA, which are unpackaged, wrapped in plastic with corner
protection,
use the unpackaged dimensions and weights. Shipments to a ll other destinations are
packaged. Fo
r weights, see the following section.
Rack specifications
Unpackaged rack Packaged rack
Width 610 mm, 24.0 inches 950 mm, 37.4 inches
Depth 925 mm, 36.4 inches 1110 mm, 43.7 inches
Height 1920 mm, 75.6 inches 2030 mm, 79.9 inches
HP StorageWorks 200 Storage Virtualization System site preparation guide
17