HP StorageWorks 200 Storage Virtualization System site preparation guide (AE071-96003, October 2006)

Floor cleara
nce and cutout dimensions
Figures on the following pages show the clearance dimensions, locations of floor cutouts, and other
dimensions for the SVS200 rack.
NOTE:
The HP SVS200 includes a cabling hole with sliding cover in the top of the rack for cable drops from the
ceiling. The hole is located in the left rear corner of the rack. This gives you the option of feeding cables
to the rack from the ceiling or from the floor through a floor cutout (described below).
Rack dimensions and cable cutout location
The following figure shows rack dimensions, clearances, and the cable cutout location. The cutout may be
off-center as long as it is within the area shown and corresponds to the opening in the bot tom of the
cabinet to allow cables to pass through. See the following pages for additional notes.
24
Site requirements