HP StorageWorks 200 Storage Virtualization System site preparation guide (AE071-96003, October 2006)

Safety precautions
CAUTION:
Be very careful when handling the equipment. Do not drop the equipment from a height of more than
0.5cm(0.2in
). Floor unevenness must be less than 1 cm ( 0.4 in).
WARNING!
The equipment frame is very h eavy. To avoid injury, use appropriate lifting tools and have three
people unpack and move the equipment.
CAUTION:
Any movement of the equipment by forklift should be done prior to unpacking. The carton assembly
providesthemostsecuresupportoftheequipmentduringmovement.Transportingtheequipmentby
forklift after the packaging carton has been removed is not advisable.
CAUTION:
The equipment rack may tip over easily and contains very sensitive electronic and mechanical
components. When you move the rack on its casters, the rolling surface must be able to support the
equipment weight and must be free of surface conditions that could cause shock or vibration to the
cabinet contents. Avoid pushing the rack from behind because it may tip over. Instead, pull the rack from
the rear to roll it. Be carefu l when pulling the rack that it doesn’t tip toward you or fall on you, causing
injury. Note that the rear casters swivel and front casters are fixed and do not swivel.
WARNING!
When using
sharpobjectsorcuttingtools,makesurethatnopartofyourbodyliesinthepathof
the blade bit or point.
CAUTION:
When system equipment is not located in a data center or computer room , it must be stored in a
controlled area that meets environmental requirements (see “Environmental requirements”) .
46
Delivery and unpacking