HP StorageWorks 200 Storage Virtualization System site preparation guide (AE071-96003, October 2006)

Removing pack
aging materials
1. If shippe d in a wooden crate:
a. Using an 11mm (7/16") ratchet or wrench, remove the six lag screws at the base of the crate.
b. Using the claw end of a claw hammer, remove the crate clamps, and then remove the crate
panels.
WARNING!
Crate clamp
s are under tension. Wear safety glasses and hold onto the clamp with
your free h
and during removal.
HP StorageWorks 200 Storage Virtualization System site preparation guide
47