HP StorageWorks 200 Storage Virtualization System site preparation guide (AE071-96003, October 2006)

2. Cut and rem ove the polyester bands (1) .
3. Remove the nails at taching the c arton to the pallet (2).
4. Remove the plastic carton fasteners (3).
5. Remove the carton.
6. Remove the accessory boxes (4), ramp (5), and corner pads (6) .
7. Using a 6mm hex and 19mm wrench, remove the adapter plates that anchor the c abinet to the pallet.
8. Removethepolybagcoveringthecabinet(7).
9. Following the instructions provided on the wooden ramp, attach the ramp to the pallet and roll
the cabinet onto the floor.
10. Visually check the unit for any damage.
48
Delivery and unpacking