HP StorageWorks Disk Array XP operating system configuration guide for Linux XP24000, XP12000, XP10000, SVS200, v01 (A5951 - 96096, June 2007)

Restarting the Linux server
To recognize the new device(s), restart the Linux server as follows:
1. Power on the display of the Linux server.
2. Power on all devices other than the Linux server.
3. Confirm ready status of all devices.
4. Power on the Linux server.
Defining the paths
Use XP Remote Web Console (shown), XP Command View (XP arrays only), or Command View XP
Advanced Edition Software to define paths (LUNs) between hosts and volumes in the disk array.
This process is also called “LUN mapping.” In XP Remote Web Console and XP Command View,
LUN mapping includes:
• Configuring ports
• Enabling LUN security on the ports
• Creating host groups
• Assigning host bus adapter WWNs to host groups
• Mapping volumes to host groups (by assigning LUNs)
In Command View XP Advanced Edition Software, LUN mapping includes:
• Configuring ports
• Creating storage groups
• Mapping volumes and WWN/host access permissions to the storage groups
For details see HP StorageWorks XP LUN Manager User's Guide or HP StorageWorks Command
View XP Advanced Edition Software Device Manager Web Client User's Guide. Note the LUNs and
their ports, WWNs, nicknames, and LDEVs for later use in verifying host and device configuration.
XP Disk Array Configuration Guide for Linux 19